California Class C topic lesson

Drive Ready

California Driving Hazards: Fog, Night & Railroad Crossings

These California driving hazards cover fog, smoke and dust, night driving and railroad crossings. Follow five worked examples, then practice this topic for free.

Questions drivers search for

Visibility and railroad crossing answers

Start with the answer, then read the explanation and the cited rule.

Driving through dust, smoke or fog: high beams or low beams?

Turn on your low-beam headlights. High beams reflect off the dust or fog and make it harder to see. California requires headlights whenever conditions keep you from clearly seeing people or vehicles 1,000 feet away, and whenever you need your wipers continuously. Slow down and leave extra following distance too.

  • CVC 24400(b), (c): headlights in darkness or inclement weather, including visibility under 1,000 feet
  • California Driver's Handbook, Section 5: An Introduction to Driving (low beams in clouds, dust, smoke or fog)

Read CVC 24400 (opens official source in a new tab)

Traffic is slow and heavy and you must cross railroad tracks. What do you do?

Wait before the tracks until there is room for your whole vehicle on the other side, then cross. Never stop on the tracks. Even with a green light, California law forbids entering a railroad crossing unless there is enough space past it for your vehicle.

  • CVC 22526(d): do not enter a railroad crossing without sufficient space on the other side

Read CVC 22526 (opens official source in a new tab)

Connect the rules

A short lesson on seeing and leaving a clear path

Use the Vehicle Code with the named California Driver's Handbook sections rather than memorizing an answer alone.

Choose lights for visibility

Use low beams in fog. If visibility becomes too poor to drive safely, avoid continuing when possible or pull completely off the roadway safely. At night, look toward the right edge of your lane rather than staring into oncoming headlights. Read DL 600, Section 5, Signals, Horns, And Headlights, and Section 8, Darkness.

Read CVC 24400 (opens official source in a new tab)

Keep the railroad crossing clear

Approach a railroad crossing ready to stop. Look and listen for trains, and wait before the tracks until your whole vehicle can clear them. Read DL 600, Section 7, Near Railroad or Light Rail Tracks and CVC 22526(d).

Read CVC 22526 (opens official source in a new tab)

Five worked examples

Practice questions explained

Read each prompt, identify the decision, and compare it with the answer and reasoning below.

You see a railroad crossbuck at a crossing and do not see a train yet. What should you do?

Correct answer: Slow, look and listen; be ready to stop for a train. Check for a train before entering the crossing. Not seeing one yet does not remove the need to look, listen and be ready to stop.

Which headlights should you use when driving in fog?

Correct answer: Low-beam headlights. High beams can reflect off the moisture and create glare. Low beams help you see in fog; parking lights alone do not replace headlights.

At night, an oncoming vehicle's high-beam headlights make it difficult for you to see. Where should you direct your eyes?

Correct answer: Toward the right edge of your lane. Looking directly into the bright lights can make it harder to see your path. Use the right edge of your lane as a guide while keeping track of the approaching vehicle.

When is it appropriate to use high-beam headlights at night?

Correct answer: Use them on dark roads when legal and not blinding other drivers. High beams help you see farther on a dark road, but other drivers need protection from glare. Dim them within 500 feet of an oncoming vehicle and within 300 feet of a vehicle you are following.

Fog, smoke, or dust becomes so dense that you cannot see far enough to drive safely. What is the safest action?

Correct answer: Avoid continuing if possible; if driving, slow and pull fully off the road safely when needed. Low beams help in poor visibility, but they cannot make every condition safe to drive through. If you cannot see enough to continue safely, leave the roadway completely when you can do so safely and wait for visibility to improve.

Free California DMV practice tests with answers

Sources and review

Checked against the California Driver's Handbook (DL 600) and the California Vehicle Code on November 3, 2026. Drive Ready (DrivingTestExam.com) is not affiliated with the California DMV. Rules can change; use the official sources below.

Back to state permit prep

Official sources and review date

Sources checked: November 3, 2026 · Next review due: February 1, 2027.

Scroll to Top